Set up Slide Show

1.Handy Tilt System allows for easy access to your camp gear while travelling or while your camper is stored.

2. Once you have picked your campsite remove the dust cover . This cover will keep your camper water & dust proof

3. Shown here is the camper unit in the fully folded position & ready to erect, see how compact the unit is!

4a. Ready to set up. First windown the stabilizer legs on both sides as shown here and the following picture.

4B. Having done one side, windown the other stabilizing leg as shown here and the previous picture.

5. The camper unit is very light so just about anybody can raise the camper unit.

6. However if you still find it difficult notice how you can use the tilt system to assist those who may say have a bad back.

7. Once the main bow is at the vertical position the camper unit becomes self-counter leving.

8. With hardly any effort at all the camper virtually stands it's self.

9. At this stage enter your camper and fit the unit to the trailer to reach this stage would have taken you about 5 minutes.

10. Once you have done the above, push out the main bow & peg the 4 corners down to the camper.

11. After completing the above you are now set up for an over-night stay. All done in about 10 minutes.

12. Pull down the awning roof, which lays fat on the camper when not in use, or when the camper is folded away.

13. Stand each corner first that way you find it very easy & only needs 1 person. The awning roof is also removable!

14. Stand the 2 center poles & run the guy ropes & pegs & your all done. At this stage its about 15 minutes or about 1 stubbie.

15. Left something in the camper & can't reach it from inside just use the tilt system no problem, access it from the outside.

16. Your camper will stay strong and sturdy even when you use the tilt system while the camper is fully up.

17. You can access your camp gear internally as well via the bed base which has a gas strut for assistance to raise the bed.

18. Access to your bed - simply step up onto the trailer, grab hold of the main bow & trailer & up you go.

19. Big queen size mattress gives you plenty of room to stretch out or cozy enough to cuddle, whatever takes your mood!

20. Looking down from the main bed you can have two single or double bunks with still plenty of room. This area is 3x2 metres.

21. All our campers come fitted so you can fit up walls to it whether you want them now or at a later date - handy when windy

22. Here our camper is shown with just 1 wall on so you can suit your needs when camping. They only take a few minutes to fit.

23. After all that driving a man's got'a have a break on his hammock under the big awning off the main camper unit.

24. Kitchenette 2 gas burner and giller with stanless steel sink & water pump

25. The big 8 x 14 foot awning with both side walls on. To set it up to this stage will take you about 20 minutes.

26. Shown here our camper with 2 tables & 4 chairs & me, Glen ready for another beer before moving to the next stage.

27. 15 minutes ... Cheer's!

To complete your camper zip on the front wall and the midge proof Fly Screens. Once all the this is done, your camper is complete & ready for you to stay as long as you want. All this in about a total of 40 minutes...
It's all too easy!
START

VISIT OUR OPTIONAL EXTRAS